－
9
－
5. Installation and Operation
(1) Install the pump in a place as free from dust and moisture, where the pump can be
easily checked and maintained.
(2) Install the pump tightly in a stable horizontal position.
(3)
Use the pump at an ambient temperature of 0°C to 40°C,equal to or less than
meters above the sea level 1000m, and humidity 85% RH (relative humidity).
(4) In case of assembling the pump in a system
Pay an attention particular to the ambient temperature: 0°C - 40°C.
Float the pump from the system using a rubber shock absorber;
install the pump so that vibration is not transmitted to the system.
By removing the fixed rubber legs, do not install the pump directly to the system.
There would be a case that the pump casing is deformed and a load occurs to the
motor bearing.
The base region installation hole position can be open in reference to Fig 3 in a long
hole.
Fig.-3 DAP-6D,12S
Holes position and size for installation
For 4
－
M4
For 4
－
M3
