Ultrawave U Series, Инструкция оператора

Страница: 8 / 20

U-Series Operating Manual 8 C6000610
Quick Guide
Pour water into the bath until it is at least ¾
full or the fluid level reaches the crease in the
tank. To reduce the process preparation
time, fill your bath with water at the
temperature required for your process. The
water you pour in must not exceed 50°C.
Add the required dose of detergent (see page
13).
Operate the ultrasonics by turning the timer
dial to the required time and pressing the
SONICS button (where applicable).
Operate the heater, if the bath has a heating function, by turning the heater
dial to the required temperature and pressing the HEAT button.
Turn on the ultrasonics for approximately 5-10 minutes to degas the cleaning
liquid. (See page 10 for more details on degassing).
The bath is now ready to use.
At the end of the cycle, remove the basket
from the bath and rinse the items under clean
running water.
The lid can be inverted and the basket placed
on top to catch excess fluid as the items dry.
Please refer to the following pages in this manual for more detailed
instructions.
Change the cleaning liquid at regular intervals. Your cleaning process will
determine how often to change the liquid
– the more soiled your items, the
more often you will need to change the liquid.
Ultrawave recommends changing the cleaning liquid at least on a daily basis.
Crease in tank