Ultrawave U Series, Инструкция оператора

Страница: 13 / 20

U-Series Operating Manual 13 C6000610
Ultrasonic cleaning detergents
Detergents are a vital component in the ultrasonic cleaning process, aiding in
the removal and loosening of debris from the surfaces of items placed in the tank
while also intensifying the power of the ultrasonic activity.
Ultrawave offers a range of specially formulated ultrasonic detergents for use in
applications including medical and heavier industrial cleaning requirements.
Sonozyme: A poly-enzymatic detergent for cleaning surgical instruments.
Ultraclean M2 : A general purpose detergent for plastics, glass and metals
(except aluminium and other soft metals)
Ultraclean SA : A general purpose cleaning detergent for aluminium and other
soft metals.
Ultraclean CS : A carbon and heavy contaminant remover.
(except aluminium and other soft metals)
Ultraclean CBX : A heavy oil and carbon remover for non-ferrous metals
(except aluminium and other soft metals).
Ultraclean SPX : An alkaline detergent for heavy carbon and tough grease.
(except aluminium and other soft metals)
Ultraclean PH : A rust removal detergent and brightening agent for non-
ferrous metals (except aluminium and other soft metals).
Ultraclean RI : Rust inhibitor for corrosion prevention of ferrous metals.
Dosing Matrix (ml of detergent per tank)
Detergent dose (ml)
Tank capacity (L) 2% 5%
U100 1.5 30 75
U100H 1.5 30 75
U300 2.5 50 125
U300H 2.5 50 125
U500H 4.5 90 225
U1300H 12.5 250 625
U2500H 25 500 1250
Each of these detergents is available from Ultrawave. The required detergent
dose may vary depending on the component being cleaned and the level of
contamination. Ultrawave recommends a dosage of between 2 and 5% for all
detergents other than Sonozyme
, which is recommended at 0.5% by volume
.