Ultrawave U Series, Инструкция оператора

Страница: 15 / 20

U-Series Operating Manual 15 C6000610
Maintenance
It is important to keep your bath clean. Not only will contaminated liquid
reduce the performance of the bath, it may also damage it. Change the
cleaning liquid regularly. Your cleaning process will determine how often to
change the liquid
– the more soiled your items, the more often you will need
to change the liquid. Change the cleaning liquid at least daily.
The base of the bath generates the ultrasonic activity by vibrating at very
high speeds. If any contaminants are in contact with the bath, they act as
an abrasive, causing wear on the metal surface. In extreme cases, the bath
will develop holes and start to leak.
Portable Appliance Testing (PAT) should be conducted with water in the bath.
There are no user serviceable parts inside the bath. All service and repair
must be conducted by suitably trained and qualified engineers approved by
Ultrawave.
Troubleshooting
Ultrawave has a dedicated After Sales team who are able to resolve any
problems that occur with your bath. However, on many occasions it is
possible that the problem can be rectified by the operator.
The unit fails to turn on and
no lights illuminate
Check that the unit is plugged in and that mains
electricity is present. Check the mains plug fuse.
The unit does not sonicate.
Check that the indicators illuminate when the unit is
switched on.
If the indicators fail to illuminate, check the mains
supply and fuse in the mains plug.
If the indicators illuminate but the bath does not
sonicate, please contact our After Sales team.
The unit sonicates but does
not clean effectively
Have you added the correct amount of cleaning fluid?
Have you overloaded the basket?
The unit sonicates but does
not heat.
Does your unit have heaters? – there will be an “H” in
the description line on the rating plate.
Check that the heater indicator illuminates when the
unit is switched on.
Is the heater dial turned to the desired temperature?
If the heater indicator illuminates but the bath does not
heat, please contact our After Sales team.