Ultrasound Technologies Fetatrack 310, Руководство по обслуживанию

Страница: 8 / 81

Ultrasound Technologies Ltd
Parts and Their Functions
Fetatrack310 Service Manual Issue3 Page 4
©Ultrasound Technologies Ltd, Lodge Way, Portskewett, Caldicot, South Wales NP26 5PS, United Kingdom.
T +44 (0) 1291 425425 F: +44 (0) 1291 427093 E: ultratec@doppler.co.uk W:
www.doppler.co.uk
FETATRACK 310 Front Panel Controls
The front panel control area contains 6 buttons used to control the operation of the
unit, they are all indicated by icons to aid language variations.
Recorder On/Off and Speed Change
This button is used to control the operation of the recorder. Press once and the
chart recorder will start, each consecutive short press will change the speed .
Pressing and holding the button down will stop the recording.
Event Mark 1
Places an event mark arrow at the top of the FHR scale .
Volume Up
This button is used to increase the audio volume level, or in configuration mode to
change user options.
Volume Down
This button is used to decrease the audio volume level, or in configuration
mode to change user operations.
US1 / US1 Transducer Select in Twins mode
Pressing this button changes the selected probe from US1 to US2 for volume
output. This is used when the unit is in twins mode with two US channels for
listening to either of the two fetuses. Press and hold to activate twins trace offset.
Toco Zero
This button zeros the Toco trace to the selected baseline.
Recorder On /
Off and speed
control
Event Mark 1.
Places arrow in
upper portion of
chart
Volume Up
Volume Down
Select ultrasound channel
for audio output in twins
mode.
Toco Zero.
Sets Toco channel
to preset baseline
value.