background image

 

Property of Ultrasonic Power Corporation - 

© 2022 

 

Publication Number UPC220504-001   

 

 

 

 

 

 

 

22

 

 

WARRANTY DISCLAIMERS 

THE WARRANTIES PROVIDED HEREIN ARE THE EXCLUSIVE WARRANTIES AND ARE EXPRESSLY GIVEN IN 

LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY 

DISCLAIMED.  EXCEPT AS PROVIDED HEREIN, UPC DISCLAIMS ANY LIABILITY, ARISING FROM CONTRACT, 

TORT OR OTHERWISE, FOR ANY LOSS OR DAMAGE INCLUDING DIRECT, INDIRECT, SPECIAL, INCIDENTAL, 

AND CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, COST OF COVER, 

INCIDENTAL DAMAGES AND PERSONAL INJURY, WHATEVER THE UNDERLYING CAUSE AND INCLUDING 

THIRD PARTY CLAIMS. 

 

 

Any and all production or performance specifications supplied by UPC are strictly estimates based upon UPC’s 

analysis of the material or parts to be processed, interpretation of tolerance and accuracy requirements, assumptions 

of facilities available and operator skill. NO SUCH PRODUCTION OR PERFORMANCE ESTIMATE SHALL 

CONSTITUTE A WARRANTY OR GUARANTEE OF PRODUCTION OR PERFORMANCE RESULTS. 

 

ADDITIONAL TERMS  

a)  The agents, dealers and employees of UPC are not authorized to make modifications to this Warranty, or to 

make additional warranties binding on UPC including, but not limited to additional warranties for Products, 

accessories or components. Additional statements, whether oral or written, do not constitute warranties and 

should not be relied upon unless made in writing and signed by an officer of UPC with authority to do so.  

b)  Regardless of any other agreement between the first Purchaser (or Customer if the first Purchaser is a 

distributor) and UPC, this Warranty will be governed and controlled in all respects by the laws of the State of 

Illinois, USA, including interpretation, enforceability, validity and construction, without regard to any conflict 

of law provisions.  The sole proper venue for the resolution of any disputes arising hereunder shall be the 

State or Federal Courts located in the County of Winnebago, State of Illinois. 

c)  This Warranty constitutes the entire understanding between the parties with respect to the subject matter 

discussed herein and supersedes any prior discussions, negotiations, agreements and understandings 

between the parties. 

d)  No assignment of this Warranty or of any right or obligation under this Warranty will be made by the first 

Purchaser (or Customer if the first Purchaser is a distributor) without the prior written consent of UPC.  Any 

assignment or transfer of this Warranty without such prior written consent will invalidate this Warranty. 

Failure to provide proof of purchase to UPC upon request will invalidate this Warranty.  

 

SHIPPING REQUIREMENTS  

Upon notifying UPC of a warranty-related claim, UPC will, if appropriate, provide a Return Material Authorization 

number (RMA) for the return of the Product and/or Accessories. If supplied to the first Purchaser (or Customer if the 

first Purchaser is a distributor), the first Purchaser (or Customer if the first Purchaser is a distributor) will complete the 

RMA and return it to UPC along with the Product or accessory. Transportation and insurance will be paid by the first 

Purchaser (or Customer if the first Purchaser is a distributor) for the return of Product and all accessories. UPC is not 

responsible for any loss or damage, which may occur in transit. UPC will ship the repaired or replaced Product(s) 

and/or accessories to the first Purchaser’s (or Customer if the first Purchaser is a distributor) place of business using 

a transportation method of its choosing or through consultation with the first Purchaser (or Customer if the first 

Purchaser is a distributor).  All Products and accessories must be shipped in their original shipping containers or 

other solid and durable shipping container. Failure to return the Product or accessories to UPC or to follow these 

procedures will invalidate this Warranty.   

 

BUSINESS INFORMATION AND RETURN ADDRESS 

All product returns for Warranty service and concerns, regarding this Warranty or otherwise, must have a Return 

Material Authorization (RMA) number.  Please ship pre-paid to:  

 

Ultrasonic Power Corporation 

Attn: RMA Coordinator 

239 East Stephenson Street 

Freeport, Illinois 61032, USA  

+1 815 235 6020

 

Содержание BT2424/Alto





























Отзывы: