Property of Ultrasonic Power Corporation -
© 2022
Publication Number UPC220504-001
18
6.2. VIBRA-BAR
®
TRANSDUCER PACK
1. Remove power from the system.
2. Check transducer stacks for damage and loose
wires.
3. If damage is visible or capacitance is low, contact
Ultrasonic Power Corporation service department for repair
or replacement.
6.3. PUMP, FILTER & PRE-STRAINER
(OPTIONAL ACCESSORY)
1. Remove power from the
system.
2. Check pump fuses
located on the inside of
the
control
panel.
Replace fuse as needed.
3. Turn both filter valves to "OFF" Position. Unscrew filter housing and replace filter.
Hand tighten filter back in place.
System Pump
