Fold & Go Model 760 PowerChair Owner’s Manual
EMC Part: 19272200 • Rev. 01 • 01/05/04
34
Troubleshooting Guide
If your Model 760 power chair does not run as expected, check the following.
• Charger plugged-in to wall outlet. Vehicle will not operate while charger is plugged-in.
• Check Controller On/Off switch. Must be in “On” position.
• Check Power Switch on Battery. Must be in “On” position for controller on/off switch to function.
• Battery may need charging. Check Battery Level Indicator. Amber or green lamps should be lit. Otherwise,
recharge battery.
• Circuit Breaker may have tripped. Reset using circuit breaker reset button on right side of Battery.
• Loose wiring. Check controller wiring connections beneath seat. Make sure connector is tight.
• Speed Indicator flashes to indicate power chair is “locked.” Refer to “Locking and Unlocking” (page 24).
Additionally, the controller of the power chair includes self-diagnostics that are displayed on the Battery Level Indicator.
Individual LED’s on this Indicator will flash to indicate a possible problem. LED meanings and appropriate corrective
action are listed in the following.
