Fold & Go Model 760 PowerChair Owner’s Manual
EMC Part: 19272200 • Rev. 01 • 01/05/04
26
Disassembling and Re-Assembling the Model 760
Your Model 760 power chair has been designed for easy disassembly for convenient transportation and storage. No tools
or special techniques are required. The complete unit disassembles to seat (with controller), Battery Pack, and frame. Use
the following to take it apart and put back together.
Taking the Power Chair Apart
The Model 760 can be quickly and easily taken apart for transport, storage, etc. No tools are needed and it is estimated it
can be taken apart within 5 minutes. Use the following to disassemble.
1.
Turn the Controller “Off” and switch battery “off” at the Battery Pack.
2.
Unlatch the Battery Pack and remove velcro straps to remove Battery Pack from frame.
3.
Disconnect the Controller wiring harness beneath the seat. Release the seat frame latch at the bottom rear and lift
seat away from frame. Seatback and frame can be folded flat for storage.
Putting the Power Chair Together
Re-assembly of the Model 760 power chair consists of replacing the Battery Pack, re-installing the seat, and re-connecting
the controller to the connector mounted on the frame.
After re-assembly, it is recommended Controller be switched “On” and functions tested before actually using the power
chair.
