Fold & Go Model 760 PowerChair Owner’s Manual
EMC Part: 19272200 • Rev. 01 • 01/05/04
11
Seat Installation
The seat is mounted on a folding, tubular frame that
attaches directly to the chassis of the vehicle. A Quick-
Release latch at the bottom rear of the vehicle frame
secures the frame in place. To install the seat:
• Tilt the seat frame forward into the two front
locations on the frame of the vehicle
• Lower the rear end of the seat frame into the rear
locations in the chassis
• Make sure the Seat Latch springs into locked position
Seat installation is shown in Figure 3.
Figure 3 — Installing the Seat