AutoGo 550 Vehicle Owner’s Manual
EMC Part: 19285600 • Rev. 03 • 09/15/04
11
Installing the Battery Pack
After the batteries have been fully charged, you’ll be ready to install the Battery Pack into the Tiller. Install the battery
pack as follows (see Illustration 3).
TIP BOTTOM
INTO TILLER
PUSH TOP OF BATTERY PACK
FIRMLY IN PLACE
19285600/3
SLOT ENGAGES
BAR ON TILLER
LOCK BATTERY
PACK HANDLE
CORRECT
INCORRECT
1.
Lift the Battery Pack by the handle and insert the
bottom of the Battery Pack into the bottom of the Tiller.
Line up the slot under the pack with the bar on lower
shelf of tiller.
2.
Firmly push the top front of the Battery Pack into the
tiller until it “snaps” in place. Ensure that the (5) pin
tiller connector mates tightly with the connector of the
Battery Pack.
3.
Make sure the handle on the battery pack is fully
returned to its seated position to lock the Battery Pack
in place.
Illustration 3 — Battery Pack Installation
19285600 Rev.03.OM
9/15/04, 5:34 PM
11