Ultraflux Uf 811, Руководство пользователя, Страница: 88 / 104

88
NT UF 811 CP GB (e) / June 2015
 The measurement differs from the predicted flow
Actions to take
o
Check that the probes are far enough away from hydraulic disturbances.
o
Check the precise dimensions of the section of the pipe or the channel at the location of the
measurement and the position of the probes.
o
Have faith in your Uf 811.
 The message "relay overflow" appears permanently or intermittently in the case of a
relay output configured in totalizer mode
Cause:
o
Too many pulses output within the allocated time.
Actions to take
o
Adapt the pulse weight and/or the width based on the flow of your application (see the
"Totalizer" section 5.4.4 - point 5).
 The message "open loop" appears permanently when setting a current output
Cause:
o
Break in the loop.
 The message "outside limits" appears permanently or intermittently when setting an
analogue input
Cause:
o
Current or voltage outside the range of use.