Ultraflux Uf 811, Руководство пользователя, Страница: 41 / 104

41
NT UF 811 CP GB (e) / June 2015
The level can be changed by selecting the menu option Configuration/Settings/Simple, Normal or Advanced:
This menu is also used to activate functions such as
 the logger,
 the inputs/outputs,
 the totalizers.
To activate these options, place the cursor on the line corresponding to the required option and use the <
and > keys.
5.3.1 Flow meter menu (“Settings” mode)
Depending on the type of flow meter and the configuration mode (simple, normal or advanced) selected, the
flow meter menu may change. Below is a non-exhaustive list of the sections for the flow meter:
 CONFIGURATION: configuration of the operating modes, the registration name, the JBUS/MODBUS
characteristics; configuration management, etc.
 PIPE/FLUID CONFIGURATION: setting of the type of fluid, the pipe, the chords, the geometry of the
chords of the measuring point, etc.
 TOTALIZER CONFIGURATION: configuration of totalizers.
 INPUT/OUTPUT CONFIGURATION: configuration of inputs and outputs.
 LOGGER CONFIGURATION: configuration of the logger.
 LINEARISATION CONFIGURATION: configuration of linearisation.
 FUNCTION CONFIGURATION: settings of the inputs for the function engine. This menu is only
available on request for specific applications.

ADVANCED CONFIGURATION: settings of the simulation mode, the special probes, the specific
codes for ultrasonic treatment, etc.
 ECHO DISPLAY: display of the echo signals of the ultrasonic probes.
 FIRMWARE UPDATE: update of the firmware