T67 STEERING SYSTEM
-
page 11
of 43
Installation and maintenance manual
ULTRAFLEX
E
N
G
L
ISH
3.3 Single cable connection to the steering system
1
Determine the correct entry position of the single cable into the helm according to the proper
steering system.
2
Remove protective tube (16) from cable
ULTRAFLEX
M58 but preserve it (see picture 4) and
keep it clean. Insert the helical cable into the
helm.
3
Turn the steering wheel so as to pull the
cable into the helm, making the cable sheath end
(17) touch the nut (18).
PUSH OR PULL TURNING DIRECTIONS
17
9
Insert the steering wheel (11) on the helm
shaft (12) aligning the recess of the hub with the
key (13) of the shaft.
Insert the washer (14) and screw the M10 screw
(15) on the hub of the steering wheel, with torque
of 35-40Nm (310-354 lbs in).
13
11
14
15
12
Do not use a steering wheel with diameter wider than 380 mm (15").
WARNING
18
16
