background image

Installation Guide

PROGRAMMING

8

PROGRAM MODE - USER SETTINGS

Enter User Program Mode  - See Page 7. for details on entering Program Mode

Setting 1- Ignition Auto Lock

Setting 2- Horn Honk Settings

Setting 3- Door Lock Options

Setting 4 -Sensor - Enable / Disable

Setting 5 - Passive / Active Arming

Setting 6 - Active / Passive Locks  

1 Double Pulse Unlock

1 Flash

A single .75 second  lock and  double unlock pulse (0.25 pulse.& 0 .75)

2 3 Second Lock & Unlock

2 Flashes

3 second pulses for lock & unlock

*3 0.75 Second Pulses

3 Flashes

0.75 second pulses for lock and unlock

1  Passive Arming                        1 Flash                         Auto Arms 30 seconds after last door is closed

2  Active Arming With Rearm       2 Flashes                     Arms if unlock is pressed and no door is opened within  30 sec.

* 3 ACTIVE ARMING                  3 Flashes                    ALARM ARMS ONLY WITH REMOTE TRANSMITTER

1 SENSORS DISABLED               1 Flash

 INTERNAL SHOCK SENSOR  AND Aux. Sensor DISABLED

* 2  SENSORS ENABLED            2 Flashes                  INTERNAL SHOCK SENSORS AND AUX. SENSOR INPUT ENABLED

1  Active Locking           1 Flash                  Doors do not auto-lock with passive arming

*2 Passive Locks        2 Flashes 

             

DOORS LOCK WHEN PASSIVE ARMING 

1  Ignition Lock & Unlock Enabled  

1 Light Flash

Doors Lock/Unlock when the key is turned On/Off

2  Ignition Lock Only

 

2 Light Flashes      

Doors Lock when ignition key is turned ON only 

*3 Ignition Auto Lock Disabled

3 Light Flashes    

Doors do not Lock or Unlock with Ignition key

1  Lock & Unlock  chirps DISABLED

1 Flash

        A audible chirp for Panic Mode  only 

2  Lock & Unlock  chirps ENABLED 

2 Flashes

        Audible chirp for Lock & Unlock but NO audible  indication for Start

*3 ALL CHIRPS  ENABLED

3 Flashes

        Audible chirp indication for Lock, Unlock and Start 

Press the Valet Switch 1 time to select setting 1 (This will be confirmed by 1 LED flashes)

Press and hold  the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.   Press the Valet momentarily  to move to next program step or repeat to change selection.

Press the Valet Switch 2 times to select setting 2 (This will be confirmed by 2 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.  Press the Valet momentarily  to move to next program step or repeat to change selection.

Press the Valet Switch 3 times to select setting 3 (This will be confirmed by 3 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.   Press the Valet momentarily  to move to next program step or repeat to change selection.

Press the Valet Switch 4 times to select setting 4 (This will be confirmed by 4 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.   Press the Valet momentarily  to move to next program step or repeat to change selection.

Press the Valet Switch 5 times to select setting 5 (This will be confirmed by 5 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch. Press the Valet momentarily  to move to next program step or repeat to change selection. 

Press the Valet Switch 6 times to select setting 6 (This will be confirmed by 6 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.  Press the Valet momentarily  to move to next program step or repeat to change selection. 

Содержание 600 SERIES













Отзывы: