background image

Installation Guide

PROGRAMMING 

9

PROGRAM MODE - ALARM SETTINGS

Setting 1 - Car Finder/ 5th Channel

Setting 2 - Secure Valet Mode

Setting 3 - Park Light Output

Setting 4 - Horn Honk Timing

Setting 5 - 4th Channel Settings

Setting 6 - Car Jack Mode

Setting 7 - Horn/ 5th Channel

Enter Alarm Program Mode  - See Page 7. for details on entering Program Mode

1  Car Finder OFF

1 Light Flash

Car Finder Mode Disabled 

*2 Car Finder ON

2 Light Flashes

Car Finder Mode Enabled

Note: To operate the 5th channel on button #4, setting 7 must be programmed for 5th channel output.

1  30 Second Parking Lights on Disarm  1 Flash

Park Lights on for 30 seconds on disarm

2  Negative Park Light

2 Flashes

Switches the Park Light and the Trunk Release (3rd Channel) Outputs

3* Normal Parking Lights

3 Flashes

2 Park Light Flashes on disarm

1   5ms                               1 Flash               Short (Quiet) Pulses

2   20ms                             2 Flashes            Long (Loud) Pulses

*3 10ms                             3 Flashes            Normal (Medium) Pulses

1  Secure Valet Active

1 Flash

Valet only if ignition “ON” and valet switch held for 15 seconds

2* Normal Valet Active

2 Flashes

Valet if ignition “ON” and valet switch held for 5 seconds 

Press the Valet Switch 1 time to select setting 1 (This will be confirmed by 1 LED flashes)

Press and hold  the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.  Press the Valet momentarily  to move to next program step or repeat to change selection.

Press the Valet Switch 2 times to select setting 2 (This will be confirmed by 2 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.  Press the Valet momentarily  to move to next program step or repeat to change selection.

Press the Valet Switch 3 times to select setting 3 (This will be confirmed by 3 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.  Press the Valet momentarily  to move to next program step or repeat to change selection.

Press the Valet Switch 4 times to select setting 4 (This will be confirmed by 4 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.  Press the Valet momentarily  to move to next program step or repeat to change selection.

1   Pulsed

       1 Flash                  Pulsed for 0.75 seconds upon 4th Channel Activation

2   Latched

       2 Flashes              Latched until repeated or ignition “ON”

*3  Active

       3 Flashes              Active for as long as the button is held on Transmitter.

1              Door & Button               1 Flash                   Activated upon Button 4 or Door open while Ignition is “ON”

2              Door, Button 4               2 Flashes               Activated upon Button 4 or Door open or  ignition “ON”  and Ignition

*3             Car Jack OFF               3 Flashes              No Car Jack Functions

1              5th Channel          

1 Flash                      Pulsed output  when activated by button #4

2              Horn Honk 2

2 Flashes                  Horn Honk Output - Full Alarm ONLY

*3             Horn Honk 1              3 Flashes                 Horn Honk with Arm & Disarm Chirps

Press the Valet Switch 5 times to select setting 5 (This will be confirmed by 5 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.  Press the Valet momentarily  to move to next program step or repeat to change selection. 

Press the Valet Switch 6 times to select setting 6 (This will be confirmed by 6 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch.  Press the Valet momentarily  to move to next program step or repeat to change selection. 

Press the Valet Switch 7 times to select setting 7 (This will be confirmed by 7 LED flashes)

Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.

Release the Valet Switch. Press the Valet momentarily  to move to next program step or repeat to change selection. 

Press the lock and Star buttons together to activate the 4th Channel output.  

The Shock Sensor and ignition will be bypassed upon 4th channel activation. 

 

Содержание 600 SERIES













Отзывы: