Page 19
Menu 3- Starter Settings
- Continued From Previous Page
Setting 4 Run Time
1) 4 Minutes
1 Flash/Honk
Runs for approximately 4 minutes when activated.
2) 45 Minutes
2 Flashes/Honks
Runs for approximately 45 minutes when activated.
*3) 15 Minutes
3 Flashes/Honks
Runs for approximately 15 minutes when activated.
Press & Release the Program
Button 4 Times (Setting 4) Confirmed with 4 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 5 Maximum Crank Time
1) 10 Seconds
1 Flash/Honk
10 sec max time that the starter will stay engaged.
2) 3 Seconds
2 Flashes/Honks
3 sec max time that the starter will stay engaged.
*3) 5 Seconds
3 Flashes/Honks
5 sec max time that the starter will stay engaged.
Press & Release the Program Button
5 Times (Setting 5) Confirmed with 5 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 6 Anti-Grind/Starter Kill (Auxiliary Connector Pin 4)
1) Active
1 Flash/Honk
(-) when locked and during remote start (Anti-Grind).
2) Passive
2 Flashes/Honks
(-) when locked /30 seconds after ignition is Off or unlock is pressed
*3) Anti-grind
3 Flashes/Honks
Output during remote start only. (Anti-grind/ Bypass module)
Press & Release the Program Button
6 Times (Setting 6) Confirmed with 6 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 7 Safety Start
1) Safety On
1 Flash/Honk
Press the start button twice within 3seconds to remote start vehicle.
*2) Safety Off
2 Flashes/Honks
Press the start button once to remote start vehicle.
Press & Release the Program Button
7 Times (Setting 7) Confirmed with 4 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
REMOTE VEHICLE STARTER
INSTALLATION MANUAL
