Menu 2- Additional Settings
Ignition
ON-OFF-ON-OFF-ON
Press & Release
Program Button
Press
Unlock
Setting 1 Secure Valet Mode - Length of time required to set the system into Service Mode
1) Secure Valet
1 Flash/Honk
Hold the Program Button for 15 seconds
*2) Normal Valet
2 Flashes/Honks
Hold the Program Button for 5 seconds
Press & Release the Program Button 1 Time
(Setting 1) confirmed 1 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 2 Parking Light/Trunk Output (14 pin auxiliary connector pins 2&8)
1) 30 sec. Output
1 Flash/Honk
Park Lights on for 30 seconds when Unlock is pressed
2) Negative Park Lights
2 Flashes/Honks
Switches the Park Lights/Trunk Outputs
*3) Park Lights3 Flashes/Honks 2 Park Light Flashes when Unlock is pressed
Press & Release the Program Button 2 Times
(Setting 2) confirmed 2 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 3 Horn Honk Timing (14 pin auxiliary connector pin 5)
1) 5 ms Pulse Output
1 Flash/Honk
Short(Quiet) Horn Output Pulses
2) 15 ms Pulse Output
2 Flashes/Honks
Long(Loud) Horn Output Pulses
*3) 10 ms Pulse Output 3 Flashes/Honks
Normal(Medium) Horn Output Pulses
Press & Release the Program Button 3 Times
(Setting 3) confirmed 3 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 4 (#) Button Operations
1) Trunk Release
1 Flash/Honk
# Button activates Trunk Release
2) Garage Door Interface 2 Flashes/Honks
# Button activates Garage Door Interface (optional)
*3) Car Finder
3 Flashes/Honks
# Button activates Car Finder Mode
Press & Release the Program Button 4 Time
(Setting 4) confirmed 4 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 5 Reservation Mode (”M” units only)
1) Manual Reservation
1 Flash/Honk
Activate Reservation Mode by pressing # Button
*2) Auto Reservation
2 Flashes/Honks
Activate Reservation Mode by pressing brake
Press & Release the Program Button 5 Time
(Setting 5) confirmed 5 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Ignition 3x
On/Off
On/Off On
Press and
Release the
Program
Button
Press and
Release the
Unlock button
for Menu 2
Press and
Release the
Program Switch
1x =Setting 1
2x =Setting 2
3x =Setting 3....
Press and
Hold the
Program Switch
1x = Option 1
2x = Option 2
3x = Option 3....
Page 17
REMOTE VEHICLE STARTER
INSTALLATION MANUAL
