UltimateAir 200DX, Руководство пользователя и инструкция по установке

Страница: 4 / 52

The UltimateAir® RecoupAerator® 200DX Manual and Installation Guide, March 2014
 

Application
The 200DX is an Energy Recovery Ventilator (ERV),
meaning that the RecoupAerator captures temperature
and moisture from the stale, outgoing air and transfers
it to the incoming air stream.
Controls
RecoupAerator is equipped with a variable speed
controller, unlimited boost function capability (i.e., you
can add timers and controllers), “check filter” indicator
light, EconoCool™ equipped, auxiliary IAQ and timer
inputs, furnace wiring terminals, and auxiliary output.
These controls allow you to adjust the airflow as
needed to maintain a comfortable level of fresh air. The
“check filter” indicator light is designed to let you know
when to check and/or clean/replace your pre-filters
and energy transfer/filtration material. For systems in
which constant ventilation is not required, a remote
on/off switch, timer, and/or furnace inputs can be
wired directly to the unit.
Frost Control
Programmed to regulate heat exchange automatically
to prevent frost build-up down to approximately 10˚ F.
During this mode, the Wall Dials green light will flash.