• Lift the vehicle until the wheel to be changed is no longer in
contact with the floor.
• Remove the wheel nuts / bolts in an alternating cross
pattern and remove the wheel.
• Attach the spare wheel and tighten the wheel nuts / bolts
crosswise until hand tight.
• Lower the vehicle and retighten the wheel nuts in an
alternating cross pattern with the wheel wrench.
Important:
After changing the wheel, check the air pressure in all tyres.
The wheel nuts / bolts must be inspected again and retighte-
ned after approximately 50 km.
Do not perform any work under the vehicle while it is lifted up
with the jack.
3
IB_KH4055_BN38061_LB4 11.09.2009 10:48 Uhr Seite 3
