Ultimaker ORIGINAL+, Руководство по сборке

Страница: 89 / 101

Step 6: mounting the electronics cover Mounting the electronics circuit board
89
6.6.6. Step 6: mounting the electronics cover
The following parts are needed in this step.
Qnty. Description
4 bolts M3 x 10mm
To mount the electronic cover system, perform the following actions.
(for action 1-4 see image 108)
1. Attach the bolts M3x16mm into the Electronic’s threated spacers, but
not all the way
2. Place the electronics cover over the bolts M3 x 16mm.
3. Move the electronics cover.
4. Attach the bolts M3 x 16mm slightly more, till they touch the wood.
image 108: mounting the electronic cover
6.6.7. Step 7: strain relief
To achieve strain reliefs, perform the following actions.
1. Wrap the black cable, bow shaped tube, and the white cables (all
connected with to the extrusion head) together in transparant wire
wrapping.
Goal is to get a tidy cable.
2. Wrap all cables together at the underside of the BOTTOM plate.
Use the velcro strips.