Ultimaker ORIGINAL+, Руководство по сборке

Страница: 49 / 101

Step 1: Assemble the extrusion head housing Assembling the extrusion head
49
12. Attach the black injection moulded part on the wooden part marked
TOP, see image 56.
Use ONE M3 x 12mm bolt and a hex nut.
image 56: attaching the black injection moulded part on the wooden part TOP
13. Move the wires of the PT100, the cartridge heater and the small fan
through the middle hole of the wooden part TOP, see image 57.
image 57: moving the wires of the thermocouple, cartridge heater and the small fan
through the wooden part TOP
(for action 20-22 see image 58)
14. Attach WHITE bowden tube clamp in the front RIGHT hole of black
injection moulded part.
15. Move the LONG studding bolts through the corner holes.
16. Place 2x 3mm spacers around the 2 LONG studding bolts that don’t go