Ultimaker ORIGINAL+, Руководство по сборке

Страница: 8 / 101

8
4 Preparation before assembling
4.1 Engraving
All panels are marked with the side they belong to.
For all the panels except the FRONT panel and the BOTTOM panel, the
engraving faces. The FRONT panel has the “Ultimaker” engraving facing
outward. The BOTTOM panel has the engraving facing downward.
4.2 Sanding
Before starting the assembly, you may want to sand the panels slightly to
remove any burn marks/blemishes from the laser cutting process. You can also
paint or stain your Ultimaker O. Be aware that paint will not cover the
brown cutting edges very well.
5 What to expect reading the assembly
instructions
5.1 Structure of the assembly instructions
Before assembling the Ultimaker O, separate sub assemblies have to be built.
The description of every sub assembly in this manual will contain:
• An overview of the needed tools;
• An estimation of the needed time to built the sub assembly;
• The steps;
Every step in this manual will be described using the following structure:
• Cautions and warnings (if applicable);
• The needed parts;
• The actions to perform the step.
To make this manual easy to understand, images are used as much as possible.