Ultimaker ORIGINAL+, Руководство по сборке

Страница: 35 / 101

Step 3: Mounting the caps Assembling the X/Y axes
35
3. Attach the wooden caps in corner C, see image 35.
The wooden caps WITH hole on the inside, the wooden end caps
WITHOUT hole on the outside.
Use ONE wooden end cap WITHOUT hole at the BACK panel.
5 Notice: Use ONE bolt M3 x 16mm and ONE hex nut 3mm at the RIGHT
panel.
5
Notice:
Use ONE bolt M3 x 16mm and ONE hex nut 3mm at the BACK
panel,
image 35: attaching the wooden caps in corner C
4. Attach the wooden caps in corner D, see image 36.
The wooden caps WITH hole on the inside, the wooden end caps
WITHOUT hole on the outside.
Use ONE a wooden end cap WITHOUT hole at the LEFT panel
5 Notice: Use ONE bolt M3 x 16mm and ONE hex nut 3mm at the BACK
panel,
5 Notice: Use two bolt M3 x 16mm and two hex nuts 3mm at the LEFT
panel.