30
To maintain your Ultimaker 2+ correctly and keep it running smoothly, it is recommended to lubricate the axes
periodically.
X AND Y AXES
When you notice small ridges on the surfaces of your 3D printed objects or feel that the X and Y axes are dry, it is
advised to put a single drop of sewing machine oil onto the X and Y axes. This will help your Ultimaker 2+ to run
smoothly. Sewing machine oil is not included in the Ultimaker 2+ package, but we highly recommend using only this
to lubricate the X and Y axes.
Z TRAPEZOIDAL LEADSCREW
Once every 6 months, the Z trapezoidal leadscrew has to be lubricated with Magnalube. This is the green grease that
was delivered with your Ultimaker 2+. Spread 10 drops of grease over the entire threaded rod. With your next print, the
Ultimaker 2+ will lubricate the axis by moving up and down.
Magnalube should be applied to the Z trapezoidal leadscrew only; do not put it on any of the other axes.
LUBRICATING THE AXES
