ULT LAS260.1, Руководство по эксплуатации

Страница: 38 / 50

Page 38
LED status messages LAS 260.1
– Date 07/2023
LED status messages
Status white
NOTICE
Standby mode
Continuously on:
The unit is waiting for a signal from a higher-level machine or
from an optionally available pedal switch.
This message is only output if the S2
switch is in the “0”
position.
Status green
NOTICE
No errors
Continuously on:
The unit is running normally within the parameters set by the
user.
The saturation of the adsorption filter is not indicated via the
LED status ring.