UGO BASILE 37240, Руководство пользователя

Страница: 18 / 35

Operation
18
Calibration button is explained in the chapter 6.2
6.1.4. Device setup menu
The Setup Icon , accessible from the Main Menu, gives access to:
• Network, for device LAN connection setup.
• Auto-reading, to set-up the automatic measurement saving functions. See par.
6.3.2 for details.
Device Set-Up Menu
Network : The Plethysmometer can be connected to a PC via Ethernet cable
which use IP protocol to communicate, this menu page is for setting up the
network parameter to use a web browser from a PC/mobile device to load
experiment data to the device and retrieve result data from the device.
You may want to connect the Plethysmometer directly to Your PC or to the Lab
LAN. (Local Area Network)
Refer to your IT technician for this set-up.
IP assignment: use auto (DHCP) (Dynamic Host Configuration Protocol) to let the
device IP address being automatically assigned.
When connecting the device to a facility LAN, make sure with IT department a DHCP
server exist and it is enabled.
When connecting the device directly to the PC through the Ethernet cable, make
sure PC Ethernet (LAN) card is set to use DHCP (Automatic IP assignment).
An Ethernet cross cable may be necessary in case of old hardware PCs.
If you need to manually assign the device IP address, select Manual and use the
following instruction to set an IP address.
IP Address: in DHCP mode shows the assigned IP Address, in Manual mode,
pressing the number makes possible to insert the desired IP address.
This number needs to be defined by your IT department, an arbitrary value can
damage the functionality of other LAN connected devices.
Subnet mask: this number, having the same syntax of the IP address, it will
Back to Contents