Manual_500 ECO_SN0001-following_0520
500 ECO
www.ufsk-osys.com
User and Service Manual
Page 6 of 50
1.
Introduction to the Product
1.1. Foreword
Dear Customer!
Thank you for choosing the treatment chair
500 ECO
by UFSK-International OSYS GmbH.
The treatment chair
500 ECO
provides an innovative working platform with superior functionality at the high level
of safety of a medical product, in accordance with Regulation (EU) 2017/745.
The treatment chair has been developed in compliance with the relevant German and international standards and
regulations and has been manufactured in accordance with the latest state of the art. It has been carefully and
thoroughly tested prior to delivery and has been shipped from our factory in flawless technical condition.
Please keep this user manual handy for future reference. It contains important information on all performance
characteristics necessary for the treatment chair safe and convenient operation by operators and/or users.
The treatment chair
500 ECO
- optionally available with colored upholstery and additional accessories - helps
you set up your own individualized and ergonomic workplace at your surgery clinic. We wish you relaxed and
successful working with
500 ECO
.
1.2. Manufacturer and Copyright
The copyright to this user manual remains the property of UFSK-International OSYS GmbH, Regensburg. This
instruction and service manual is intended only for the operator and its staff. It contains directions and instructions
which may not be reproduced or copied either in full or in part.
Manufacturer’s Contact Details:
UFSK-International OSYS GmbH
Kirchhoffstrasse 1
D-93055 Regensburg
Phone: +49 941 78862-15
Fax:
+49 941 78862-35
Mail:
Web:
1.3. Warranty Clause
UFSK-International OSYS GmbH agrees, to the extent provided by law, to assume warranty for your equipment
including accessories which exhibits defects resulting from manufacturing and/or material faults within 12 months
of purchase. This warranty shall not apply in cases where the equipment’s defect is attributable to improper
treatment and/or disregard of the equipment’s intended use and/or failure to comply with the code of conduct
specified in this instruction and service manual. Any failure to comply with the user manual, any improperly
executed maintenance work or any technical modifications and additions made without the prior consent of
UFSK-International OSYS GmbH will result in the lapse of any product warranty claims as well as general product
liability. Only original spare parts and wearing parts may be used. It cannot be guaranteed that components
supplied by third parties have been designed/manufactured to meet the pertinent stress and safety standards.
