UFO UFO MER3000M, Руководство пользователя

Страница: 5 / 16

Universal Fibre Optics
5
CONNECTION – MER3000DMX
There are 3 connections required – the fibre port, the mains supply cable and the DMX
control cable. The fibre port should be connected first. Connect and secure the fibre optic
connector into the green collar and secure using the M5 locking screw.
Connect the IEC power cord into the Desk Top PSU and plug the mains plug into the
electrical supply socket. Switch on power the led Indicator will illuminate and the light
source is ready for use. If no light is produced consult the TROUBLESHOOTING section.
NOTE: THESE LIGHT SOURCES ARE NOT MAINS DIMMABLE
Connect up the DMX control cables to the Mini-XLR sockets on the rear of the Light Source.
The recommended plug for these sockets is Multicomp SVP556-TA. The pin out details for the
plugs are shown below.