UFO UFO MER3000M, Руководство пользователя

Страница: 4 / 16

Mercury Light Source Range
4
CONNECTION – MER3000M
There are 2 connections required – the fibre port and the mains supply cable. The fibre port
should be connected first. Connect and secure the fibre optic connector into the green collar
and secure using the M5 locking screw.
Connect the IEC power cord into the Desk Top PSU and plug the mains plug into the
electrical supply socket. Switch on power the led Indicator will illuminate and the light
source is ready for use. If no light is produced consult the TROUBLESHOOTING section.
NOTE: THESE LIGHT SOURCES ARE NOT MAINS DIMMABLE
NORMAL OPERATION – MER3000
Under normal operation the MER3000 Light Source can be dimmed manually using the
dimmer control on the rear of the unit.