UFO NOVA DMX, Руководство пользователя

Страница: 7 / 16

Universal Fibre Optics 7
OPERATION
Remote Operation
No Description Function
01
Button Power ON
02
Button Power OFF
03
Colour Ring Touch control all colours (White not available)
04
Indicator Indicates Controller active when buttons pressed
05
Button Increase colour cycle speed
06
Button Increase Brightness
07
Button Decrease Brightness
08
Button Decrease Colour cycle speed
09
Button Mode + Step up through Colour cycle programmes
10
Button Mode - Step down through Colour cycle programmes
2. OFF
3. Colour Ring
9. Mode
+
10. Mode
-
1. ON
4. Indicator Light
5. Speed
+
6. Brightness
+
7. Brightness
-
8. Speed
-
REMOTE CONTROLLER OPERATION
Matching Remote to Light Source – Remove the power plug from the rear of the Light
Source, then replace and once the Indicator Light (4.) lights, touch button 5 within 3
seconds, the Light Source will “blink” twice slowly indicating that the Remote Controller is
matched to the Light Source.
Once the remote is matched, follow the procedure on page 10 to put the light source into
remote programme mode. The light source should then respond to remote commands.
Unmatching Remote from Light Source - Remove the power plug from the rear of the
Light Source, then replace and once the Indicator Light (4.) lights, touch and hold button 5
within 3 seconds and the Light Source will “blink” 9 times indicating that the Remote
Controller is unmatched from the Light Source.