UFO Illuminator 150 CDMXG, Руководство пользователя

Страница: 15 / 20

Universal Fiber Optics
14
TROUBLESHOOTING
Problem Probable cause(s) Remedy
Unit is completely dead -
Lamp and LED power
indicator are not
illuminated
Main fuse blown Check and replace fuse.
No power to unit
Check that power is switched on and
power supply is plugged in.
LED power indicator & fan
are on, but no light is out-
put
Lamp blown Replace lamp
Thermal switch activated
Allow unit to cool for 5 to 10
minutes and investigate reason for
overheating
Lamp wires are not
connected
Check plug connection - ensure lamp
is properly seated in its holder and
the pins are fully mated
Poor light output
Lamp needs replacing Replace lamp
Unit needs cleaning Clean glass lens
Incorrect power supply Ensure power supply is 120VAC 60Hz
Fibre port connector not
plugged in correctly
Ensure fibre port connector is
plugged in correctly, and that the
screw is tightened up properly
Lamp going on & off
randomly
Unit is overheating
Allow unit to cool for 5 to 10
minutes and investigate reason for
overheating