UFO Illuminator 150 CDMXG, Руководство пользователя

Страница: 8 / 20

Compact DMX Illuminator Range
INSTALLATION GUIDE (Continued)
OPERATION (Continued)
When the DMX illuminator is powered up the unit will RESET during which, the
following flashing message will be displayed on the front panel display
(Item 4 Page 1):
When the illuminator is RESET the following message will be displayed:
This indicates the illuminator has been set to address 001 by default.
PROGRAMMING
At any stage during programming, when changes are made the DMX may go
through the RESET phase as described above – this is normal.
Changing Address
To change the address press the 2 buttons to the left of the display (Items 2 & 3 Page
1) simultaneously once the small indicator in the bottom right of the display will go
out. Scroll for the required address as follows:
Once the selected address is found, there will be a short delay (may RESET) until the
small indicator illuminates confirming the address is set.
7