UFO Illuminator 150 CDMXG, Руководство пользователя

Страница: 9 / 20

Universal Fiber Optics
INSTALLATION GUIDE (Continued)
PROGRAMMING (Continued)
Color Wheel Built in Progams
T o access the built in programmes as described in the User Guide proceed as
follows. Press the 2 buttons to the left of the display (Items 2 & 3 Page 1)
simultaneously twice and the following message will be displayed:
After a short delay (may RESET) the small indicator will flash confirming programme
mode P01 is set as shown below. The illuminator will display white light:
Scroll through the Built in Programs until the desired programme is reached there
will be a short delay (may RESET) until the small indicator flashes confirming the
address is set. The set programme will now run. The programme will only run if left
in this mode, returning to the Address Mode will stop the program running.
To return to Address Mode press the 2 buttons to the left of the display (Items 2 & 3
Page 1) simultaneously three times.
Note 1: There is an Auxiliary mode which may be displayed as shown below. This is
not used. If in this mode press the 2 buttons simultaneously twice to return to
Address mode:
Note 2: In Master/Slave and Remote DMX controller operation the small indicator
flashes to indicate DMX data transmission
8