UfiSpace S9501-28SMT, Руководство по установке оборудования

Страница: 19 / 29

S9501-28SMT
Hardware Installation Guide | 16
8
Grounding the Router
Insulaon
Wire Lead
Green/Yellow
Ground Wire
(size #6 AWG)
0.5 +/- 0.02”
(12.7 +/- 0.5mm)
Crimping Tool
Grounding Lug
Figure 24.
Warning
This equipment must be grounded. Do not defeat the ground conductor or operate
the equipment without correctly grounding the equipment. If there is any uncertainty
about the integrity of the equipment's grounding, please contact the electrical
inspection authority or a certified electrician.
1. Before grounding the router, ensure that the rack is properly grounded and in
compliance with local regulatory guidelines. Ensure that there is nothing that can obstuct
the connection for grounding and remove any paint or materials that may prevent good
grounding contact.
2. Strip the insulation from a size #6 AWG grounding wire (not provided within the package
contents), leaving 0.5” +/-0.02” (12.7mm +/-0.5mm) of exposed grounding wire.
3. Insert the exposed grounding wire all the way into the hole of the grounding lug
(provided with package contents).
4. Using a crimping tool, firmly secure the grounding wire to the grounding lug.
It is recommended that equipment changes be done on a grounded rack system. This will
reduce or prevent the risk of shock hazards, equipment damage, and potential of data
corruption.
The router can be grounded from the router's case and/or the power supply units (PSUs).
When grounding the PSUs, ensure that both PSUs are grounded at the same time in case
one of them is removed. A grounding lug and M4 screws and washers are provided with the
package contents, however, the grounding wire is not included. For convenience, there are
two locations on th e case in which the grounding lug may be fixed.
The following instructions are for grounding the router.