UfiSpace S9501-28SMT, Руководство по установке оборудования

Страница: 26 / 29

S9501-28SMT
Hardware Installation Guide | 23
12 Cable Connection
s
12.1 Connect
i
ng the USB Extender Cable
Connect the USB 2.0 A Type plug (male connector) into the USB port (female connector) located
on the front panel of the router.
TAT
Figure 32.
12.2 Connecting a Cable to the ToD Interface
12.3 Connecting a Cable to the BITS Interface
1. Connect one end of a shielded RJ48 cable to the port labelled “BITS” located on the
front panel of the router.
2. Connect the other end of the cable to the BITS patch or demarcation panel.
3. Below is the pinout for the BITS port.
BITS_T1_RTIP_CONN
BR1
1RX+
1RX-
1TX+
B4
B5
1TX-
B7
B8
BR2
BR3
BR4
BR5
BR6
BR7
BR8
BITS_T1_RRING_CONN
Figure 33.
12.4 Connecting the GNSS Interface
1.
Connect one end of a straight-through Ethernet cable to the GNSS unit
;
2. Connect the other end of the straight-through Ethernet cable to the port marked
“TOD” located on the front panel of the router.
Connect an external GNSS antenna with an impedance of 50 ohms to the port marked
“GNSS ANT” located on the front panel of the router.