S9500-30XS Hardware Installation Guide | 25
•
Maintain a clear line of sight to the port LEDs by routing the cables away from the LEDs.
Before connecting anything (cables, transceivers, etc.) to the router, please ensure
to discharge any static electricity that may have built up during handling. It is also
recommended the cabling be done by a professional who is grounded, such as by
wearing an ESD wrist strap.
Please follow the steps below for connecting a transceiver.
1.
Remove the new transceiver from its protective packaging.
2.
Remove the protective plug from the transceiver port.
3.
Place the bail (wire handle) in the unlocked position and align the transceiver with the port.
4.
Slide the transceiver into the port and use gentle pressure to secure it in place. An audible click
can be heard when the transceiver is secured in the port.
