S9500-30XS Hardware Installation Guide | 23
Connecting a Cable to the BITS Interface
1.
Connect
one end of a shielded RJ48 cable to the port labelled “BITS” located on the
front panel
of the router.
2.
Connect the other end of the cable to the BITS patch or demarcation panel.
Figure 31.
3.
Below is the pinout for the BITS port.
Figure 32.
Connecting the GNSS Interface
Connect an external GNSS antenna with an impedance of 50 ohms to the port marked
“GNSS ANT”
located on the front panel of the router.
Figure 33.
