UFESA DH5020, Инструкция по эксплуатации

Страница: 37 / 102

37
Fan speed: Set low or high speed.
Sleep mode: The appliance will run with minimum wind speed.
Mode selection: The pressing order is dehumidify
→ Continuous dehumidification → Dry Clothing func-
tion → Fan function.
Switch: Start the appliance, power failure memory.
Built-in microcomputer memorizes the operation of dehumidifier, once it is set.
The unit repeats the same operation by pressing on/off button switch (in case of disconnection by un-
plugging or power failure, start over the setting again).
HOW TO OPERATE
Make sure that the water tank is set properly.
Note: If the water tank is full, the water indicator light will be on and the rest are not displayed.
Plug the appliance to the mains.
Press the on/off switch. “Dehumidification” mode lamp will light up.
Set the unit to the desired operation by pressing “mode” switch (14).
Every time you press the “mode” switch, the mode select lamps light up in turn as dehumidifying
→
continuous drainage → Dry clothes → Fan.
TIMER
The dehumidifier will stop automatically after the hours set by the timer (0h to 24h).
In any mode, you can press “TIMER” switch to set the timer 0h to 24h.
When the timer button is pressed, the machine starts to enter the timer function and the icon will appear
on the screen.
When the machine is turned on, the timing function can be used to delay off the machine.
When the unit is turned off, the timing function can be used to delay start the machine.
With the lapse of time, the timer lamp lighting up will indicate the remaining time.
The unit will stop operating after the lapse of the set time.
STOP OPERATING
To stop the appliance, press again the on/off switch.
The select mode lamp will goes off and the unit will stop operating.
NOTE:
Except “Continuous” mode operation, the timer set will be cancelled whenever “mode” switch pressed.
Set the timer again after pressing “mode” switch, if necessary.
The timer will stops when the water tank is full of water.
After the tank is emptied, the timer will start again.