THE ELIMINATOR 80
By
Installation, Operation and Care Manual
Страница 1: ...THE ELIMINATOR 80 By Installation Operation and Care Manual ...
Страница 2: ...tor 80 You should have received The Eliminator 80 1 Height adjustment screws 2 6 Outside hood 1 6 flexible insulated ducting 4 ft 1 22 m Self adhesive gasket 20 ft 6 m REQUIRED TOOLS MATERIALS To install the Eliminator 80 you will need the following tools Reciprocating jig saw or hole saw Caulking Caulking gun Flexible caulking Duct tape Pan head wood screws and washers Sheet rock anchors for fini...
Страница 3: ...flex pipe between the Eliminator 80 and the outside hood Before making the hole be sure there is no plumbing electrical wire or other obstruction behind the wall or outside 5 Measure the amount of flex pipe needed Secure flex to the top collar on the Eliminator 80 with tie wraps supplied 6 Run flex to the outside and cut with knife 7 From the outside of the house peel back 3 4 762 1016 mm of the i...
Страница 4: ...vered by this warranty This warranty does not cover damage to the unit while your possession other than damage by defective parts or material Improper maintenance voids this warranty If the unit is put to commercial use or application other than residential use the warranty is for a period of one 1 year Remember to return your Warranty Registration Card 16 Nelson St P O Box 2758 Street Windsor Nov...
