![background image](http://html.mh-extra.com/html/ufesa/da6000/da6000_instruction-manual_834912008.webp)
Use and operation
Before using the appliance for the first
time, disassemble it and wash all parts
that come into contact with the
processed food products (see „Cleaning and
Maintenance”). Reassemble once dry.
1
Place the appliance on hard, dry and level surface
near a wall socket.
2
Distribute the food on drying trays and place the
trays in the extended position
3b
on the heat and
ventilation unit
1
Apply the lid
4
. To extend the
trays, rotate them 90 degrees relative to each other so
that a large gap is visible between them.
Distribute food products loosely on trays,
making sure not to block the airflow
through the trays. Choose the number of
trays according to the amount of food
you intend to dry.
Dehydration is achieved by the
circulation of hot air through the trays.
The drying time depends on the content
of water in products and their fragmentation.
For example, when drying apples, it is
recommended to use slices not thicker than
5 mm.
3
Insert the plug into a wall outlet.
4
Switch on the appliance by pressing the On/Off
button . The appliance will start operating on power
I setting. The indicator light
2c
will come on.
Never use the appliance with trays in
the folded position!
For even drying result, it is recommended
to change the position of sieves from
time to time during operation. Note that
drying products with high water content, such as
plums, grapes or wet mushrooms takes much
more time.
B
●
If water gets inside the heat-and-ventilation
unit and comes into contact with any electrical
components, make sure to dry the appliance
thoroughly before plugging it into electrical outlet.
●
Do not clean the body of the heat and ventilation
unit with any aggressive detergents, such as emulsion,
milk, paste, etc. as they can remove the graphic
symbols such as: scales, labels, caution signs, etc.
SUGGESTION
Information on the product
and suggestions for its use
●
This appliance is intended for domestic use only.
●
Unwind a sufficient length of the cord from the
storage compartment of the heat and ventilation
unit before attempting to use the appliance.
●
Clean all parts of your appliance thoroughly before
first use.
●
Unplug the appliance after use.
Technical data and description
The technical data are given on the nameplate.
Nominal capacity: 11 l.
Noise level (L
WA
): 66 dB/A.
Construction of the appliance
1
Heat-and-ventilation unit
2
Control panel
a
On/Off switch
b
Power level switch
c
Indicator light – power level I (250 W)
d
Indicator light – power level II (500 W)
3
Drying trays (4 pcs.)
The drying trays may be adjusted between two
positions:
a
Folded position – only for storing the appliance
(saving space)
b
Extended position – for using the appliance
(a large gap is visible between the trays)
4
Lid
5
Cord storage compartment
6
Power cord
A