UFESA Antek ZVC3501R, Инструкция по эксплуатации

Страница: 15 / 46

15
1 2 3 4 5 6 7 8 9 10 11
ZVC3501R +
SAFBAG
1 PIECE
HEPA 13 Telescopic
Flexi
wired
+ + + + -
ZVC3501T +
SAFBAG
1 PIECE
HEPA 13 Telescopic
Flexi
wired
+ + + + -
ZVC3502N +
SAFBAG
1 PIECE
HEPA 13 Telescopic
Flexi
wired
+ + + - +
ZVC3506B +
SAFBAG
1 PIECE
HEPA 16 Telescopic
Flexi
wired
+ + + + +
VACUUM CLEANER OPERATION
1. Connect the hose to vacuum cleaner: insert the hose end into the hose socket.
2. Adjust the length of the telescopic suction tube by sliding the slider according to the arrow
and pull out/pull the tube together.
3. Connect the different nozzle or brush to the telescopic tube for different cleaning purpose.
4. The vacuum cleaner is equipped with an accessory compartment. In order to open it pull the
compartment cover up.
5. Pull the plug and cord out of the vacuum cleaner.
Before operation make sure that the SAFBAG is installed in the vacuum cleaner chamber and
that inlet filter and the outlet filter is installed in the appliance.
6. Switch on the vacuum cleaner by pressing On/Off
7. The vacuum cleaner is equipped with electronic power regulator in order to reduce or increa-
se the power.
VACUUM CLEANER ACCESSORIES
Parquet brush
Used to clean sensitive surfaces such us floor panels, parquet, marble and like that. Delicate
and soft natural bristles ensure maximum vacuum effectiveness and protects against scrat-
ching the cleaned surface.
Turbo brush
Used to clean hard floors or floors where you need extra cleaning power. The turbo brush con-
tains a rotating brush to lift and beat your carpet or fabric as you vacuum.
MODEL AD
JUST
ABLE
SUCTION PO
WER
UPHOLSTER
Y
NO
ZZLE
CREVICE NO
ZZLE
R
OUND
BRUSH PAR
QUET
BRUSH TURBO BRUSH DUST B
AG
OUTLET FIL
TER
SUCTION TUBE SUCTION HOSE