PIPELINE CLEANING & TELEVISING EQUIPMENT
PIPELINE CLEANING & TELEVISING EQUIPMENT
The rear of the camera is terminated with a built-in six pin
male connector which mates with the push cable connector.
They are held together with three stainless steel combination
head screws. An O-ring has been placed between the
camera and the cable connector to seal out liquids.
Procedures for camera maintenance are covered in the
maintenance section of this manual.
Push Reel
The push-reel (Fig. 2.3) safely stores and dispenses the
video push cable and camera head. It is lightweight and
contains wheels for mobility.
A brake handle is provided to keep the cable basket from
rotating when transporting the unit. After the basket is
locked, the brake handle can be repositioned by lifting and
rotating into a stored position.
The push reel now also features a quick disconnect block
termination. This feature allows the user to easily swap out
push cable by simply
disconnecting the cable
from a single connector.
Figure 2.3
-12-
Cable Reel
-35-
