PIPELINE CLEANING & TELEVISING EQUIPMENT
PIPELINE CLEANING & TELEVISING EQUIPMENT
Battery Compartment
The battery compartment is underneath
the flexible keyboard (Figure 2.10). The
compartment has a cover with a latch and fits
only UEMSI style battery packs.
DVR Keypad
The DVR keypad (Fig 2.9) is located on the
left side of the lower faceplate. This keypad
has all of the same functions of the wireless
remote control and also has indicator LED’s
to show the user when the DVR is on,
recording, and when the hard drive is in use.
-16-
Figure 2.10
Recessed Interface Panel
The recessed interface panel is located on the right side
of the ProCam case (Fig. 2.11). The center military style
connector, titled ‘Camera’, connects to the interconnect
cable on the reel. The 12V DC connector to the right of
the camera connector is used to operate the system on
DC power. It connects to the DC power cord, which plugs
into a vehicle’s power port (cigarette lighter). The 120V AC
connector is on the far right side of the panel, which is used
to provide AC power to the unit.
Figure 2.9
-31-
Data Display I System
The Data Display I System has many features. These
include: a moveable display window with distance, time, date
and two lines of pre-programmed text. Also included in the
system is a digital footage head with encoder.
This mounts on the push reel and comes with an upgraded
interconnect cable. It also has a remove/restore function that
temporarily clears the screen for an unobstructed view of the
video image. Contact your UEMSI Representative for further
details.
Please refer to the separate Data Display I System
manual for detailed instructions on this option.
Tracker II Pipe Location System
The UEMSI Tracker II is an extremely accurate and easy-to-
use pipe location system. This includes the receiver which
has a LCD screen with digital display and variable audible
tone. It works hand-in-hand with the In-line transmitter which
attaches directly behind the camera head on the push cable.
The transmitter is powered by the power control unit and has
a range of up to 20’.
Brush Skids
UEMSI offers 6” and 8” diameter
brush skids for use in larger pipelines.
Contact your UEMSI representative
for further details.
Each camera head is shipped with a
factory-installed 6” brush skid assembly
(Fig. 4.3). To convert it to a 4” skid, loosen the two socket
head cap screws with a 7/64” hex wrench, and remove the
skid from the camera head. Then remove the brushes by
pulling them through the inside of the skid. Reattach the skid
onto the camera.
Figure 4.3
