7
4. NORMAL START UP SEQUENCE
4.1 EVERY TIME YOU USE THE ANALYZER
• BEFORE SWITCH-ON CHECK THAT:
• the particle filter is dry and not dirty or damaged
• the water trap and probe line are empty of water
• all hose connections, etc, are properly made
• the probe is sampling CLEAN AMBIENT air
• the water trap is correctly fitted and the analyzer upright
* DO NOT RUN Analyzer WITHOUT WATER TRAP FITTED *
Switch ON the analyzer by pressing
4.2 AUTOMATIC ZERO CALIBRATION
During this sequence the analyzer pumps fresh air into the sensors to allow them to zero and the oxygen
sensor to be set to 20.9 %.
After switch-on the analyzer will briefly display information:
AUTOplus
SW V1.04
Bluetooth
• SW is the software version
• Bluetooth indicates Bluetooth fitted and enabled
