28
OFF 30
PRESS ENTER TO GO BACK
12.52.30 pm 03/22/15
If you have not finished but press
by mistake, you can press
to return to normal
operation and not switch OFF.
TIP:
It’s a good idea to empty the water trap after testing so that the risk of water getting on to the
particle filter or into the analyzer is minimized.
5. PRINTING INFORMATION – OPTIONAL EXTRA ONLY
Supplied as an accessory for the analyzer is an infrared thermal printer. Read the manual supplied with
the printer prior to operation. Connections to the analyzer are detailed below :
•
Infrared thermal printer
- this does not require a cable to transmit the data but uses an infrared (IR)
link similar to a TV remote control. The IR emitter is positioned on the top of the analyzer and the bottom
of the printer. Ensure they are pointing at each other and within 300 mm, with no obstructions in the
way. Data may be lost if transmission is interrupted, a black square is evidence of this. Keep the analyzer
pointing at the printer until the printout has finished.
Data can either be printed from a ‘live’ test or from stored data.
5.1 PRINTING A ‘LIVE’ TEST
During a vehicle test the analyzer will print data on request. With the analyzer showing the MAIN
DISPLAY press
and you will hear the bleep. Current data will be sent to the printer. If the print
button is held until the third bleep, the test results will be printed in duplicate.
