ó ïì ó
Mounting the third bicycle
The third bicycle is mounted in the same manner as the first.
Note that the bicycles are mounted in opposite directions.
The third bicycle is attached to the second bicycle with the
additional bracket (2).
Mounting the fourth bicycle
3
The fourth bicycle is mounted in the same manner as the first.
Note that the bicycles are mounted in opposite directions.
The fourth bicycle is attached to the third bicycle with the additional
bracket (2).
Removing bicycles
The bikes are removed in the reverse order.
Adjusting the lamps
If the vehicle
4
or the load of the bicycle rack protrude at the
side more than 40 cm over the outer edge of the tail lights (9)
(distance B), move the tail lights (9) outwards.
1. Squeeze the locking mechanism (31), move the tail lights (10)
to the outer position and release the locking mechanism (31).
2. Check that the tail lights (10) sit firmly.
3. Prior to collapsing the bicycle rack (1), return the tail lights (10)
to the starting position in the reverse order.
߬¬»²¬·±²
Only attach the bracket (2) to the bicycle frame, as other parts
of the bicycle could be damaged. Do not pinch components
such as gear or brake cables.
Faulty clamps must be replaced immediately.
3. Hitch rack Uebler F42 for 4 bicycles
(Order no. 15740)
߬¬»²¬·±²
Only attach the bracket (2) to the bicycle frame, as other parts
of the bicycle could be damaged. Do not pinch components
such as gear or brake cables.
Faulty clamps must be replaced immediately.
4. without wing mirror
