16
side of the camera turns red. The camera is now ready for use! If the power LED of the UltraView
blinks, your battery has depleted its charge before startup.
When the power is on, the red Power LED is lit. The system starts after approximately 10 to 15
seconds. The UE Systems logo will appear on the screen.
When the system setup is
complete, the UltraView’s user interface will start automatically, and you are ready to
make sound visible!
The UltraView has internal system backup batteries which are charged by the main battery while
in use.
At the first system start up
, it is recommended that the camera stays powered by the
main battery for at least 45 minutes, so the internal backup batteries are charged fully.
If you wish to attach the wrist lanyard that comes with the camera in the battery housing, you can
find the point of attachment on top of the battery housing lid.
Image 7.
Inserting the
RRC2040
battery.
Image 6.
Attaching
the RRC2040
battery
housing.
1.
Unscrew and remove the lowest
screw of the camera handle.
(Tool: 2.5 mm Hex socket
screwdriver)
2.
Insert the support spacer in the
screw hole.
3.
Insert the battery housing into the
camera handle. The housing is in
its correct place when the screw
hole of the battery housing is
aligned with the lowest screw hole
of the camera handle.
4.
Screw the 30 mm hex screw
through the housing into the
handle. Tighten firmly.
1.
Power switch button
2.
RRC2040 Battery in the correct
position when inserting in the
housing.
3.
Battery Cover
4.
1
2
3
4
1
2
3
Содержание ULTRAVIEW
Страница 1: ...1 UE SYSTEMS INC ULTRAVIEW MANUAL ...