manualshive.com logo in svg

UE Systems ULTRAVIEW, Руководство пользователя, Страница: 13 / 33

Поделиться
Скачать
UE Systems ULTRAVIEW Скачать руководство пользователя страница 13

 

13 

 

 

 

 

3. GETTING STARTED 

 

Before every use, make sure that all the parts are in good condition. Due to supplier storage 
time and transportation regulations the charge of the batteries may be low. To ensure a long 
lifetime for the batteries, charge the batteries fully before the first use. During first 
operation, 

power on the UltraView for at least 45 minutes, according to intended 

use, to optimize the battery life. 

 

3.1 Spare parts and accessories

 

The main power source of the UltraView is either RRC2040 or the Tracer external battery. 
The batteries should be charged fully before operating the device. Please note that the 
batteries should also be fully charged before storage. 
 

!! NOTE: THE ULTRAVIEW IS NOT INTENDED TO BE USED WHILE THE BATTERIES 
ARE CHARGING. CHARGE THE BATTERIES ONLY WHEN DISCONNECTED!! 
 
!! NOTE: CHARGE THE BATTERIES AT TEMPERATURES BETWEEN 0 °C AND +40 °C 
(32 °F TO 104 °F)!!

 

 

3.1.1 CHARGING THE RRC2040 BATTERY 

Before using the batteries, remember to charge them first. To fully charge an empty 
RRC2040 battery usually takes about 2 hours. Please note that the battery should be 
charged at temperatures between 0 °C and +40 °C (32 °F to 104 °F). A new RRC2040 
battery used in optimal environmental conditions yields over 2.5 hours of usage. 
 
The RRC2040 batteries and the charger are delivered with the UltraView. Only use the 
provided battery charger. To charge the battery, please follow these instructions: 
 

1.

 

Plug the DC barrel connector of the power supply to the RRC Charger. 

2.

 

Plug the mains cable of the charger into the wall socket. 

3.

 

Ensure that the connectors of the battery and the charger bay are aligned when 
inserting the battery. When inserted correctly, the battery stands firmly and straight. The 
charger light starts blinking when the battery 

is connected properly

. 

 
When the battery starts charging, the charger light turns orange. When the battery is full, 
the light turns green. You can 

see how much the battery has charge by pressing the 

charge gauge

. 

 
 

 

 

 

Содержание ULTRAVIEW


































Отзывы:

Нет отзывов