13
When in the first Menu mode: “Data Transfer,” it is possible to move to any of the other Menu
modes by spinning the Sensitivity Control up or down (clockwise or counter clockwise).
When the desired Menu mode is reached, push (Click) the Sensitivity Control in.
It is possible to spin to enter and exit any Menu mode in the Set Up mode if the trigger on/off switch
is pressed.
MENU 01 DATA TRANSFER
NOTE:
Before downloading data, be sure the Ultraprobe is connected to the computer.
TO DOWNLOAD DATA FROM THE ULTRAPROBE TO A COMPUTER
Follow steps 1-3 in Set Up Mode
The first selection to be displayed on the screen will be
“Menu 01 Data Transfer”.
Click the Sensitivity Control Dial and all the data will be transferred to the PC.
NOTE:
For software management, refer to Ultratrend
Tm
Instructions.
MENU 02 SET TIME AND DATE
Make sure the Ultraprobe is off.
Press (click) both the yellow Store button and the Sensitivity dial at the same time, then
squeeze and hold the trigger.
When in the first Menu Selection: “Data Transfer” (Menu 01), the user may move to any
other Menu Selections by spinning the Sensitivity dial up or down (clockwise or counter
clockwise).
Spin to “Set Time and Date” (Menu 02) blinks and click. (EXIT Blinks).
Spin to desired month or day or year and Click (selected number will blink rapidly).
Spin to select a new value
Click to set.
Spin to TIME setting and click on Hour or Minute (the displayed number will blink rapidly).
Once an hour or minute has been selected, spin to select a new value.
